PART 7 HOW TO CEILING FAN WIND TURBINE MOV 1

THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT WOULD COST TOO MUCH FOR REPAIRS AND NEW DEPOSITS AND OLD BILL TO RECONNECT, ESPECIALY WITH REPAIRS FOR A NEW SERVICE BOX AND UPDATING TO A BREAKER SYSTEM AND THE WIRES DESTROYED IN THE HOUSE. ALTHOUGH THIS UNIT WILL NOT NORMALLY SUPPLY A NORMAL HOUSE HOLD IT WILL ALLOW HIM TO HAVE LIGHTS , RADIO, TV , CELLPHONE CHARGING, AND A FEW MORE THINGS BUT NOT ALL AT ONCE OR CONSTANTLY. BUT 20 DOLLARS A DAY FOR GAS IN A GENERATOR IS NOT AN OPTION EITHER. A BAG OF ICE, AND A COOLER IS. WE ARE MAKING A SOLAR HOT WATER HEATER AS WELL. BY 1:00 PM HE WILL HAVE ENOUGH WATER TO DO DISHES AND GET A NICE HOT SHOWER. THEN RELAX BY THE TV OR RADIO FOR A FEW HOURS ON STORED ENERGY. THEN GO TO SLEEP WITH A SMILE. IF HE GETS UP IN THE NIGHT HE CAN JUST TURN ON THE LIGHT. AND ITS ALL FREE. I HAVE ONE CONFESSION TO MAKE ABOUT THE ONE IN THE FIRST VIDEO THAT EVERYONE HAS COMPLEMENTED ON FROM THE BEGINNING. THAT IS , THAT THE ONE THAT IS IN THE VIDEO IS THE 7th OR 8th ONE I DID. I DID IT FOR SOMEONE ELSE BUT I DESTROYED ONE OF THE COIL SETS IN IT BY PULLING ON THE WIRES TO HARD WHILE I WAS RETHREADING THE WIRES TO COME OUT THE OTHER SIDE. BUT THE 12 VOLT SYSTEM INSTEAD OF 24 VOLT SYSTEM WILL NOT SLOW THE BLADES DOWN WHEN UNDER A LOAD SO IT PERFORMS AT ITS LOWERED MAXIMUM VOLTAGE MOST OF THE TIME. IT SEEMS TO KEEP MY SHOP RADIO AND FLOURESENT LIGHT GOING AS MUCH AS I NEED IT TO EXCEPT FOR WHEN IT RAINS AND THE WIND DOESNT BLOW FOR A FEW DAYS. ONE OF THE CEILING FAN MOTORS I HAVE IN THE SHOP WILL REPLACE THE ORIGIONAL U2B DEBUTED SPECIAL WITH MORE MAGNETS AND TWICE THE COILS FOR MORE OUTPUT. THE BLACK ONE IS CRANKING OUT 5 TIMES THE POWER ALREADY, IM JELOUS. AND IT COGS REAL HARD. AND WHEN YOU SHORT THE WIRES IT GETS REAL HARD TO TURN. THAT IS A GOOD TEST OF EFFICIENCY. ANY DC OR AC PERMANENT MAGNET MOTOR THAT YOU CAN SHORT THE WIRES OUT ON AND IT DOESNT WANT TO TURN IS A DARNED GOOD WIND TURBINE. IF WE ADD ANOTHER SET OF MAGNETS TO HIS IT WILL DUOBLE THE VOLTAGE AND WE WILL HAVE TO GO TO A HIGHER VOLTAGE BATTERY BANK WHICH IS GOOD SEEING AS THE COILS CAN ONLY PUT OUT 1 AMP PER SET. THERE ARE 2 SETS SO 2 AMP TIMES 48 VOLTS = 100 WATTS SO IF WE ADD THE MAGS IT WILL BE A 200 WATT UNIT WITHOUT HEATING UP THE WIRES BUT WE WILL HAVE TO GET 7 OR 8 BATTERIES. OR AT LEAST 4 OR 5 . TIME WILL TELL. MUDD

Duration : 0:9:20


Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

25 Responses to “PART 7 HOW TO CEILING FAN WIND TURBINE MOV 1”

  1. I bet you will like …
    I bet you will like the new vids Im uploading right now. one is ok but the other four are great.
    Happy New Year to you Mark
    MUDDy

  2. Nice video, Come …
    Nice video, Come see my profile for free internet marketing coaching ! Limited time offer

  3. Not realy. I mean …
    Not realy. I mean if the coil is 1 inch then the magnet can be 1 inch or narrower, thus a gap or not. it is better to have a little gap so the magnet next to it sends more of the flux into the coil instead of the magnetic flux being pulled straight across to the magnet next to it.
    The idea is to get as much flux through the coil as possible.
    MUDDy

  4. Yes Always, I have …
    Yes Always, I have a few people that want to do this project and are strapped fpr the cash to get a cheap one or have no uck in finding free ones on the side of the road. and a few more projects around here as well. THANKS BUNCHES.
    MUDDy

  5. hi do you need some …
    hi do you need some old ceiling fan motors i have like 10 or so that i dont need im a ceiling fan colleter so let me know

  6. hello scotty,need …
    hello scotty,need some help,i have made a magnet generator from washing machine motor and fitted with an other motor to turn the generator,but the prob is…when i connect it with the battery it get block and turn very slowely,may i change the turning direction or wot?plz replay me,thanx

  7. hi scott,thanx a …
    hi scott,thanx a lot,got it,,,will attach another battry or 2,,,thanx for replay

  8. Hello my friend. It …
    Hello my friend. It is good to hear from you. What you have described to me sounds like the alternator is running at a higher voltage than the battery. less rpms will help. DO THIS: measure the open voltage of the alternator. ( that is with the alternator disconnected.) Then if it is much higher than the battery voltage, then either decrease the RPMs or add more batteries in series.
    MUDDy

  9. DONT FORGET THE …
    DONT FORGET THE BLOCKING DIODES AND RECTIFICATION.
    MUDDy

  10. ANYTIME MY FRIEND. …
    ANYTIME MY FRIEND.
    MUDDY

  11. Hello …
    Hello muddymuddymuddmann

    I have to admit I am very impressed with the quality of your videos here on youtube.

    They are certainly a pleasure to watch as I do enjoy them.

    I am sure there is many others who also feel the same about your videos.

    Mark McCulloch

  12. Hey Scott how are …
    Hey Scott how are you doing ? Looks good man! Got my general class . Give me a call . Kurt

  13. THANKS, I got more …
    THANKS, I got more on the way.
    muddy

  14. hey kurt , hows …
    hey kurt , hows virginia? long time. check out #8.
    mudd

  15. Nice video, Come …
    Nice video, Come see my profile for free internet marketing coaching ! Limited time offer

  16. do you need to have …
    do you need to have a space between each magnet

  17. NOT YET! I have to …
    NOT YET! I have to get the rig from sweetwater if it still exists.

  18. Cool ! Lots of fun …
    Cool ! Lots of fun ! Look out for lighting. lol Are you on 80m? Iam set. KW

  19. Scott:

    Excellent …
    Scott:

    Excellent man! This is a great project. I have really enjoyed watching this series. Thank you.

    Bill

  20. Thanks Bill. Is it …
    Thanks Bill. Is it vacation time yet?
    lol mudd

  21. another fine …
    another fine production from green wind and other home energies…….

  22. THANK YOU i had fun …
    THANK YOU i had fun doing it. all i have left to do is paint the pipes that make up the framework and test it if the wind will cooperate. oh and make a big washer for the yaw bearing. there will be a few more vids soon but in a month, if everything goes the way i think it will, we will do an axial flux rig. 1.5 KW.
    mudd

  23. A really great and …
    A really great and inspiring series Muddy.. I can’t wait to see this working

  24. good,keep it up,
    good,keep it up,

  25. hey what’s up ol …
    hey what’s up ol friend?! I said it befor and Ill say it again. if the wind doesn’t blow when its finnished , its a good sign. the wind is usualy 10-15 or above here. but the last 2 days ,,,,nuthin… its supposed to pick up to normal by tommorrow though. I feel a little right now. I will get back with an update when the wind says i can. lol
    MUDD

Leave a Reply